Basic Info.
After-sales Service
Whole Life
Application
Fire Extinguisher
Feature
Critical Cleaning / Residue Free
Machine Body Material
Full Manganese Steel Body
Dust Removal System
Venturi Wet Dust Removal System;
Motor for Shot Head
ABB Motor
Capacity
1000-3000PCS/8h Customized
PLC and Touch Screen
Siemens
Transport Package
Plywooden Box or Conatiner Suitable for Sea
Product Description
Product Description
The hook-type shot blasting machine is divided into single hook and double hook. The hook-type shot blasting machine uses two hooks to load the workpieces alternately into the shot blasting cleaning chamber. The shot blaster throws 0.1~1.5mm projectiles onto the surface of the workpiece, so that the surface of the workpiece reaches a certain roughness, making the workpiece beautiful, or changing the compressive stress of the workpiece to increase its service life.
Hook-type shot blasting machines are divided into single hook and double hook. Hook-type shot blasting machines are loaded with workpieces alternately into the shot blasting cleaning chamber by two hooks. The shot blaster throws 0.1~1.5mm projectiles onto the surface of the workpiece, so that the surface of the workpiece reaches a certain roughness, making the workpiece beautiful, or changing the compressive stress of the workpiece to increase its life. This machine is widely used in the surface cleaning or strengthening treatment of medium and small castings and forgings in industries such as gears, gear shafts, forging, casting, construction, chemical industry, motors, and machine tools, such as descaling, burrs, and sand castings. And this machine is suitable for cleaning slender and thin-walled parts that are not suitable for collision. As the standard model of shot blasting cleaning machine, the hook-type shot blasting machine has a rotating diameter of the shot blasting chamber ranging from 1000 to 3000 mm and a height ranging from 1200 to 3000 mm. The standard model has 2-7 blasting heads and a load capacity of 10,000 kg. This shot blasting machine has a very high production efficiency and a wide range of flexibility. It is an ideal cleaning and strengthening equipment and is easy to operate. Just load the workpiece to be processed onto the machine and press the start button. After a very short time (usually 5-7 minutes), the entire cleaning process is completed and all dust and residual shot are removed. It is mainly suitable for the surface treatment of various medium and large castings, forgings, weldments, and heat-treated parts, including fragile and irregularly shaped workpieces.
Product Parameters
| 1 | Equipment model | MHB2-1717P/Q11-3 |
| 2 | Sorting configuration | Wind selection |
| 3 | Equipment application | Intermittent cleaning of small batches of workpieces of various types |
| 4 | Shot blasting machine type | Casting type |
| 5 | Number of shot blasting machines | 3 pieces |
| 6 | Motor power of shot blasting machine | 11KW/piece |
| 7 | Magnetic separator | None |
| 8 | Load bearing (excluding tooling) | ≤1 ton |
| 9 | Rotation range (mm) | φ1700*1700mm |
| 10 | Maximum inlet size (width x height) mm | 1892*2115mm |
| 11 | Semi-automatic flow valve | 3 sets |
| 12 | Fully automatic flow valve | Optional |
| 13 | Dry dust collector | DC-12 |
| 14 | Wet dust collector | Optional |
| 15 | Bare machine dimensions | 7800*6700*8000 (for reference only) |
| (length * width * height) mm | |
| 16 | Including dust collector dimensions | 13000*6700*21000mm (for reference only) |
| (length * width * height) mm | |
| 17 | Total power + dust collector | 44.85KW+11KW (for reference only) |
| 18 | Total weight bare machine + dust collector | 13.57 tons+3.3T (for reference only) |
| 19 | Chimney (weight + area) | Optional |
1. The shot blasting machine motor adopts ABB, with excellent and controllable manufacturing process, good sealing, good dynamic balance, stable and reliable performance.
2. The shot blasting machine shell is made of 10mm high-quality carbon steel plate through laser cutting, precision bending and welding. The shell is positioned and welded with a special jig to ensure the parallelism of the two end faces of the shot blasting machine shell and the concentricity of the hole.
3. The top guard plate is made of die steel CNC precision machining, with a machining accuracy of ±0.01; low-pressure vacuum heat treatment is used after machining.
4. The end guard plate is made of high wear-resistant manganese 13 steel plate and is made by laser cutting.
5. The side guard plate is made of die steel CNC precision machining, with a machining accuracy of ±0.01; low-pressure vacuum heat treatment is used after machining.
6. The directional sleeve is made of die steel CNC precision machining, with a machining accuracy of ±0.01, uniform wear, and good dynamic balance; low-pressure vacuum heat treatment is used after machining.
7. The shot wheel is precision machined by die steel CNC, with a machining accuracy of ±0.01, uniform wear and good dynamic balance; low-pressure vacuum heat treatment is used after machining.
8. The blades are precision machined by die steel CNC, with a machining accuracy of ±0.01, a weight difference of ±2g for each blade, uniform wear and good dynamic balance; low-pressure vacuum heat treatment is used after machining.
9. The impeller is precision machined by die steel CNC, with a machining accuracy of ±0.01; low-pressure vacuum heat treatment is used after machining, and the surface hardness can reach HRC58-62.
10. The service life of the above wearing parts: more than three times that of casting products (shot material used: S460 or less (1.5mm cast steel shot), hardness: HRC40-50).II.Flow valve1. Semi-automatic flow control system, used to control the flow of shot entering the shot blasting machine, by manually adjusting the steel shot flow 2. Fully sealed structural design, with lockable inspection opening, equipped with two bearings.
3. Each flow valve is equipped with a manual shut-off valve at the top, which can be closed when the flow valve needs to be repaired to close the shot flowing from the silo for easy maintenance.
III. Shot blasting room
1. The shot blasting room is welded with all manganese steel.
2. Several manganese steel protective plates are installed in the hot zone of the shot blasting room, located in the 3/4 area of the direct blasting area of the shot blasting head, to prevent the steel shot from splashing the outer wall of the shot blasting room. It is suspended and fixed, easy to install, and easy to disassemble and replace.
3. A three-layer sealing structure is installed on the top to prevent the steel shot from leaking from the top during the shot blasting operation.IV.Pneumatic door1. The shot blasting room has a compact structure and a closed design to ensure that the shot blasting does not splash the steel.
2. The door is automatically opened and closed and controlled by a cylinder.
V.Y-type slide rail and lifting device
1. 1 set of Y-type rail car to achieve continuous operation of two stations. The rail changing mechanism is controlled by pneumatic valve to realize the rail changing function. When one hoist is in shot blasting working state, the other one is used for loading and unloading.
2. 2 sets of tooling systems, made of wear-resistant steel bars after heat treatment and welding (can be designed according to actual customer needs).
3. 2 sets of hoisting systems adopt 4-section skeleton telescopic structure and chain electric hoist system with good stability.
VI. Electric control box
1. Use Siemens PLC and touch screen
2. Use Delta or BEST inverter
3. Use Chint or Schneider brand low-voltage electrical components
4. Use shot blasting time controller
5. Use AirTac pneumatic components
6. Use flow detection ammeter
7. 1 lighting lamp
8. 1 set of dedicated constant temperature air conditioner (optional)
VII. Client
FAQ
Q1: Are you a trading company or a manufactory?
A1: We are a manufactury we supply the factory price with good quality, welcome to visit !
Q2: What's your guarantee or the warranty of the quality if we buy your machines?
A2: We offer you high quality machines with 1 year guarantee and supply life-long technical support.
Q3: When can I get my machine after I paid?
A3: Normally production time is around 30-60days,the exactly depend on what kind of machine you order.The shipping time is based
on your destination port.
Q4: How to install my machines when it arrives?how much the cost?
A4: We will send our engineers to your factory to install the machines and train your staff how to operate the machines.
Customer pay airtickets go and back,accommodation and USD100/day/person.
Q5:How long time for installation?
A5:According your machines order,we will send one or two engineers to your plant,it will take about 10 days to 25 days.
Q6: How about the spare parts?
A6: We will send one year enough easy broken spare parts together with the machines,shipping together.During the warranty time,we
will supply the spare parts with our cost including the delivery fees.
Address:
No. 2-18 Longshan Road, High-Tech Industrial Development Zone, Wuxi, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Industrial Equipment & Components
Company Introduction:
Our factory has been producing high-quality slurry pumps for over 20 years, and we are proud to say that our pumps are trusted and used by many companies worldwide. What sets our pumps apart from others in the market is their durability, efficiency, and low maintenance requirements.
One of the key features of our slurry pump is its rugged design, which is capable of handling even the toughest and most abrasive slurry. The pump is also designed to operate for extended periods without the need for frequent repairs, making it a cost-effective choice for companies that require reliable and long-lasting equipment.
In addition to its rugged design, our slurry pump also boasts impressive efficiency levels, which can help companies save on energy costs in the long run. The pump is engineered to deliver high flow rates with minimal energy consumption, making it an eco-friendly choice that contributes to sustainable operations.
Finally, our slurry pump is designed with ease of maintenance in mind. The pump′s components are easily accessible, making it simple for technicians to carry out routine maintenance and repairs. This feature can save companies time and money in terms of downtime and repair costs.
In summary, our factory′s slurry pump is a durable, efficient, and low-maintenance choice for companies in a range of industries. Whether you′re in mining, construction, or wastewater treatment, our slurry pump can help you transport even the most demanding slurry with ease.
Different kinds of pumps are available in our company. We′re pleased to get your Inquiry and will reply as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.
){kind=link}