No-Leakage Mechanical Seal Pump Seal Seal Ring

• Customization: Available
• Structure: Single End
• Pressure: High Pressure Mechanical Seals
• Model NO.: HLT
• Speed: Ultra-High-Speed Mechanical Seal
• Temperature: High Temperature Mechanical Seal
• Performance: Corrosion
• Standard: Standard, Nonstandard
• Type: HBM1
• Balance: Balanced
• Product Name: Mechanical Seal
• Material: Rubber, Stainless Steel, Corundum Ceramics
• Advantage: Erosion Resistant
• Spring and Metal Parts: 304, 316 Hast.C
• Secondary Seal: NBR, Viton, EPDM, Kalrez
• Seal Ring: Car, Sic, Ssic, Tc
• Certification: ISO9002
• Usage: Mining, Chemical Industry
• Transport Package: Standard Sea Wood Package
• Specification: Customized
• Trademark: Sunrise
• Origin: Jiangsu, China
• HS Code: 8413910000
• Production Capacity: 1000 Sets/Year

Product Description

No-leakage Mechanical Seal Pump Seal Seal Ring

 

Product Description

The mechanical seal is a shaft seal device that relies on a pair or several pairs of end faces that are perpendicular to the shaft to slide relative to each other under the action of fluid pressure and the elastic force (or magnetic force) of the compensation mechanism and is matched with auxiliary seals to achieve leakage prevention.
It is a shaft seal device for rotating machinery.

Structure
The main components
Moving ring, static ring, cooling device, and compression spring (depending on the specific equipment).

Auxiliary seal
The sealing ring (O-shaped, X-shaped, U-shaped, wedge-shaped, rectangular flexible graphite, PTFE coated rubber O-ring, etc.).

Elastic Compensation Mechanism
Spring, push ring, spring seat, and key or various screws

Static, Dynamic Ring

The function of the end face seal is to make the sealing surface closely fit to prevent the medium from leaking. It requires static and dynamic rings to have good wear resistance


 

Auxiliary seal

It mainly plays the role of sealing the static ring and the moving ring, and also plays the role of floating and buffering. Guarantee the tightness between the static ring and the gland, and the tightness between the moving ring and the shaft or bushing


 

Elastic Compensation Mechanism

A new type of wear-resistant impeller newly developed by our company is made of Al2O3 as the main raw material, rare metal oxide as the flux, and special corundum lined with high-temperature roasting at 1,700 degrees. The Rockwell hardness is HRA80- 90, the hardness is second only to diamond, far exceeding the wear resistance of high chromium cast iron and the acid resistance of stainless steel.

 

Different Models

Single face  A pair of sealed faces

Features: No external sealing liquid supply system is required, but a self-flush system is required, easy to manufacture and disassemble, and simple in structure

Applicable: general liquid occasions, such as oil bodies, etc. When combined with other auxiliary systems, it can be used in suspended particles, high-temperature and high-pressure liquids, etc.

Multi-end face Two pairs or more of sealing end faces

Features: Sealing liquid needs to be introduced for sealing, lubrication, flushing and cooling, and the pressure of the sealing liquid is 0.05-0.15Mpa higher than the pressure of the medium

Applicable: Suitable for corrosion, high temperature, liquefied gas with solid particles and fibers, poor lubrication medium, and volatile, flammable, explosive, toxic, easy to crystallize and other media

Multi-spring 

Features: There is a group of springs, and the force on the end face is uniform, but the spring wire is thin, the corrosion resistance is poor, and the installation size is strict.

Applicable: occasions with a heavy load, large shaft diameter, high speed, and low corrosion.

 

Application

Packaging & Shipping

Standard shipping wooden box packing

 

 

Company Profile

 

 

FAQ

Q1. What kind of certificates do you have?
A1: We have been ISO9001:2008 and ISO14001:2004 certified by S G S since 2005.
A2: We have various rubber compounds approved by U L, KTW, W270, WRAS, ACS, AS4020, EN681, EN549, ROHS, and REACH.

Q2: How to check the quality of the bulk order?
A1: We provide preproduction samples before mass production for all customers if needed.
A2: We provide quality certs such as measurement reports, material data sheets, COO, COA, etc. to all customers before delivery.
A3: We accept third-party inspections such as S G S, TUV, INTERTEK, BV, etc.

Q3: How to select the raw compound for my application?
A: With years of experience working with a variety of materials, we can help select the material that will best suit your needs
while keeping material costs in mind.

Q4: Do you use any international standards for rubber products?
A: Yes, we mainly use ASTM D2000 standard to define the quality of the rubber materials, and tolerances as per ISO3302, ISO2768, etc.

Q5: Can you supply different color materials?
A: Yes, we can produce custom molded rubber and silicone rubber products in different colors, the color code will be required in case of an order.

Q6: What materials are available to produce from your side?
A: NBR, EPDM, SILICONE, (FKM), NEOPRENE(CR), NR, IIR, SBR, ACM, AEM, Fluorosilicone(FVMQ), FFKM, Liquid Silicone, Sponge, etc.

 

In order to ensure the fastest feedback and correct quotation for you, we need to know the following information:

1. Main body material: 2CR13 304 316L 2205
    Seal ring material: graphite, SIC, hard alloy, titanium alloy
    O-ring material: nitrile, EPDM, fluorine rubber, polytetrafluoroethylene, perfluoro ether
2. Medium
3. Shaft diameter
4. Installation Diagram